Win95 Config

Configuring The Dialup Adapter

1. First check to see if you have the Dial-Up Adapter already installed by clicking on My Computer and looking for the Dial-Up Networking icon.
2. If you already have one installed, go on to Adding the TCP/IP Protocol.
3. If not follow the directions below to add the Dialup Adapter.

Adding the Dial-Up Adapter

1. Open up the Control Panel
2. Click on Add/Remove Programs
3. Click on the Windows Setup tab
4. Double click on Communications
5. Select Dial-Up Networking
6. Click on the OK button
7. Reboot if Requested

Go to Adding TCP/IP Protocol

©2000 ZipLink. All Rights Reserved.